Panel clean — from $189
Single-storey tile or metal roof, up to 20 panels, deionised water clean plus inverter reading and written condition report. Add $6 per panel beyond 20. Second storey or pitch above 30° adds $60 for extra height safety.
Services & rates
We don’t wash windows, we don’t pressure-clean driveways and we don’t sell panels. Solar cleaning and bird-proofing is the whole business, which is why a 20-panel array takes us a couple of hours instead of a day.
Single-storey tile or metal roof, up to 20 panels, deionised water clean plus inverter reading and written condition report. Add $6 per panel beyond 20. Second storey or pitch above 30° adds $60 for extra height safety.
8 mm marine-grade stainless mesh with powder-coated clips, fitted around the full array perimeter. A typical 6.6 kW array runs 22–28 linear metres. Minimum charge $420, mesh and clips supplied.
Removal and bagging of nesting material, feather and dropping clean-down, tile and gutter-line rinse, neutral cleaner treatment. Heavy build-ups quoted on inspection. Always done before mesh is fitted.
Our most common booking: full clean, clear-out and perimeter mesh in one visit. One set-up, one trip, one discount. Typical 6.6 kW tile roof lands around $665 all in.
Only available while we’re already anchored on your roof for a clean or mesh job. Debris bagged and taken away, downpipes flow-tested.
Two cleans a year, mesh integrity check, priority booking after storms and dust events, and a 10% discount on any repair referral work. Cancel any time with 30 days’ notice.
Travel is included for the suburbs listed on our home page. Beyond that, a $35 call-out applies — we’ll tell you before you commit, not after.
500 L tank, deionising resin filter and inverter-generator in the van. Your tap and your power bill stay out of it.
Temporary anchors, harness, ladder bracket and a ground exclusion zone on every job, single storey included.
Emailed the same evening: panel count, glass condition, clamp and seal check, cable observations, before/after inverter figures.
Nesting waste, mesh offcuts and gutter debris leave in the van. Driveway hosed down before we go.
If a bird gets back under mesh we fitted within two years, we come back and fix it at no charge.
Once a year for most homes, twice for properties near construction, unsealed roads, farmland or heavy gum cover. Rain alone doesn’t shift the fine clay dust we get out west — it just streaks it.
No. We use soft brushes and pure deionised water at low pressure, which is what practically every manufacturer specifies. High-pressure washing and detergents are what void warranties, and we use neither.
Never. Clips grip the panel frame itself, so there are no penetrations in tiles, Colorbond or the racking. Your roof and installer warranties stay intact.
No. Nothing lethal, no spikes, no chemicals, no gel. We clear nests when they’re unoccupied and exclude birds from the cavity so they nest somewhere sensible instead. If there are live chicks, we come back after they’ve fledged.
A clean on a 6.6 kW array: about 1.5 hours. Clean plus full perimeter mesh: 3 to 4 hours. Heavy guano jobs can push to half a day.
Ideally yes for the first visit, so we can talk you through the report and confirm access. For repeat cleans, side-gate access and a text on arrival is plenty.
Bank transfer or card tap in the van on completion. Invoice emailed with the report. Care plans are billed per visit, never upfront for the year.